Storage Containers for Rent NZ - Buy a Storage Container

MX20 shipping- / storage container

• Containers with ISO standard dimensions
• Suitable for shipping and warehouse purposes
• Wind and water tight
• Floor: Height: 170 mm (± 5 mm, measured to internal floor level)
• Door: centrally opening double door, with externally lockable bar lock assembly
• Strong steel structure
• Fitted with forklift pocket
• Storage capacity: 33 m3/20′
• valid CSC plate (on request)

MX20 E electrically equipped storage container

• Containers with ISO standard dimensions
• Suitable for shipping and warehouse purposes
• Wind and water tight
• Floor: Height: 170 mm (± 5 mm, measured to internal floor level)
• Door: centrally opening double door, with externally lockable bar lock assembly
• Strong steel structure
• Fitted with forklift pocket
• Storage capacity: 33 m3 / 20′

Electrical facilities:

• 1 pc 400 V / 5-pole 3 x 32 A external connection according to CEE norms
• 1 pc fuse-box with RCD and circuit breaker
• 2 pcs bulkhead lamps with grid and 60 W bulb
• 1 pc light switch
• 1 pc 230 V plug

MX10 storage container

• Suitable for shipping and warehouse purposes
• Wind and water tight
• Floor: Height: 170 mm (± 5 mm, measured to internal floor level)
• Door: centrally opening double door, with externally lockable bar lock assembly
• Strong steel structure
• Fitted with forklift pocket

MX10 E electrically equipped storage container

• Suitable for shipping and warehouse purposes
• Wind and water tight
• Floor: Height: 170 mm (± 5 mm, measured to internal floor level)
• Door: centrally opening double door, with externally lockable bar lock assembly
• Strong steel structure
• Fitted with forklift pocket

Electrical facilities:

• 1 pc 400 V / 5-pole 3 x 32 A external connection according to CEE norms
• 1 pc fuse-box with RCD and circuit breaker
• 1 pc bulkhead lamp with grid and 60 W bulb
• 1 pc light switch
• 1 pc 230 V plug

MX40 ISO standard shipping- / storage container

• Containers with ISO standard dimensions
• Suitable for shipping and warehouse purposes
• Wind and water tight
• Floor: Height: 170 mm (± 5 mm, measured to internal floor level)
• Door: centrally opening double door, each with two externally lockable bar lock assemblies
• Strong steel structure
• Storage capacity: 68 m3 / 20′
• valid CSC plate (on request)

MI20 document archiving container

• Ideal solution for companies and institutes to store archive documents.
• 1 pc outer door: 875 x 2.000 mm
• Thermal insulated ceiling, PVC floor covering
• 30 cm deep fixed steel shelves
• 4 pcs ventilation outlets with anti-rodent protection
• Small reading desk with own lighting

Electrical facilities:

• 1 pc 400 V / 5-pole 3 x 32 A external connection according to CEE norms
• 1 pc fuse-box with RCD and circuit breaker
• 2 pcs 2 x 36 Watt fluorescent lamps
• 1 pc reading lamp
• 1 pc light switch
• 1 pc 230 V plug

MK10 environmental protection container 

Maximum safety was taken into consideration in this container design, for the collection and temporary storage of transportation packaging materials which contain liquid hazardous materials or waste. The container has solid, sealed walls, with an outward-opening double-wing door at one end. The bottom consists of a salvage tray which is designed to capture and collect any liquids, which can then be drained out through a sealed pipe using the tap located on the left-side of the container. The removable floor placed on top of the salvage tray is made from galvanized, welded, steel grid. As a result, as long as the regulations are respected, no environmental pollution can be caused by any hazardous waste which may leak out during temporary storage.

 The following legislation and standards were respected in the design:
- chemical safety: Act XXV of 2000, Health Ministry Decision no. 44/200. [XII.27]
- waste management: Act XLIII of 2000, Gov. Decision no. 98/2001. [VI. 15]
- accidents involving hazardous materials: Act LXXIV of 1999
- fire protection: Act XXXI of 1996, Interior Ministry Decisions no. 2/2002 [l.23] and 35/1996. [XII. 29]
- international shipping of hazardous goods on public roads: Hungarian National Standard MSZ 9936

MK20 environmental protection container 

Maximum safety was taken into consideration in this container design, for the collection and temporary storage of transportation packaging materials which contain liquid hazardous materials or waste. The container has solid, sealed walls, with an outward-opening double-wing door at one end. The bottom consists of a salvage tray which is designed to capture and collect any liquids, which can then be drained out through a sealed pipe using the tap located on the left-side of the container. The removable floor placed on top of the salvage tray is made from galvanized, welded, steel grid. As a result, as long as the regulations are respected, no environmental pollution can be caused by any hazardous waste which may leak out during temporary storage.

 The following legislation and standards were respected in the design:
- chemical safety: Act XXV of 2000, Health Ministry Decision no. 44/200. [XII.27]
- waste management: Act XLIII of 2000, Gov. Decision no. 98/2001. [VI. 15]
- accidents involving hazardous materials: Act LXXIV of 1999
- fire protection: Act XXXI of 1996, Interior Ministry Decisions no. 2/2002 [l.23] and 35/1996. [XII. 29]
- international shipping of hazardous goods on public roads: Hungarian National Standard MSZ 9936

MO20 split office / storage container
 

• Combination of office and storage functions
• Ideal changing room and workshop for small teams of workers
• Perfect base for painting, assembly and maintenance companies

Storage section equipment:

• Door: centrally opening double door, with externally lockable bar lock assembly
• 3 pcs 500 x 2.350 mm built-in steel shelves
• Wall-mounted tool storage

Office-changing room section equipment:

• 1 pc outer door: 875 x 2.000 mm
• 1 pc white PVC window: 900 x 1.200 mm, tilt and turn mechanism, thermal insulated, with fitted grid

Electrical facilities:

• 1 pc 400 V / 5-pole 3 x 32 A external connection according to CEE norms
• 1 pc fuse-box with RCD and circuit breaker

Storage section:

• 1 pc bulkhead lamp with grid and 60 W bulb
• 1 pc light switch
• 1 pc 230 V plug

Office-changing room section:

• 1 pc 2 x 36 Watt fluorescent lamp
• 1 pc light switch
• 1 pc 230 V plug